Read Reviews

AC Maintenance in College Station, TX

Professional Air Conditioner Tune-Up Service

Regular air conditioning maintenance is the difference between a system that fails during a heat wave and one that runs reliably for 20 years. Here in College Station, where your AC runs nearly nine months a year, professional maintenance isn't optional - it's essential for comfort, efficiency, and equipment longevity. We're Total Comfort Air Solutions LLC, and our 26 years of experience has taught us that properly maintained systems last longer, run cheaper, and break down less frequently.

We Are Not Comfortable Until You Are - this philosophy extends to preventive maintenance. We help you avoid the discomfort of AC failures through comprehensive maintenance programs that keep your system running at peak performance.

Book Service Today

Why AC Maintenance Matters More in College Station

The Brazos Valley's climate punishes air conditioning systems like few places in the country. With summer temperatures regularly exceeding 95°F, humidity levels above 80%, and cooling seasons stretching from March through November, your AC system works harder and longer than systems in moderate climates. This extreme duty cycle accelerates wear, degrades components faster, and requires more frequent maintenance to prevent failures.

Consider what your air conditioner endures annually: over 2,500 hours of operation, removal of hundreds of gallons of humidity, filtration of pounds of dust and pollen, and exposure to temperature swings from freezing to over 110°F. Without proper maintenance, these stresses cause premature failures that always seem to occur during the hottest weather when you need cooling most.

Our comprehensive maintenance programs address the specific challenges of our climate. We don't just change filters and check refrigerant - we perform thorough inspections, cleanings, and adjustments that prevent the problems common to Texas air conditioners.

Book Service Today

The Real Cost of Skipping Maintenance

Many homeowners skip maintenance thinking they're saving money, but the numbers tell a different story:

Energy waste from dirty systems costs hundreds annually. A neglected air conditioner uses up to 30% more electricity than a well-maintained unit. With College Station electric rates, that translates to substantial unnecessary costs each year. Our maintenance keeps systems operating at manufacturer efficiency ratings.
Premature replacement costs thousands. Air conditioners should last 15-20 years with proper care, but neglected systems often fail in 8-10 years. Replacing a system prematurely can cost thousands of dollars that proper maintenance would have prevented.
Emergency repairs are expensive and disruptive. A failed capacitor during regular maintenance is relatively affordable. The same failure during a weekend emergency call costs significantly more. More importantly, you avoid the discomfort of system failure during extreme weather.
Warranty voidance leaves you unprotected. Most manufacturer warranties require annual professional maintenance. Skip it, and you're responsible for repairs that should be covered. We've seen homeowners pay thousands for compressor replacements that warranty would have covered if they'd maintained their systems.

Our Comprehensive Maintenance Process

Spring AC Tune-Up Service

Spring maintenance prepares your system for the demanding cooling season ahead. Our comprehensive service includes:

Complete system inspection identifies developing problems before they cause failures. We examine every component from thermostat to condenser, documenting condition and noting items requiring attention. This inspection often reveals issues like worn contactors, weak capacitors, or refrigerant leaks that would cause summer breakdowns if left unaddressed.
Thorough cleaning restores efficiency and capacity. Winter's accumulation of dust, pollen, and debris insulates components and restricts airflow. We clean evaporator and condenser coils using specialized chemicals and techniques that remove buildup without damaging delicate fins. Clean coils transfer heat efficiently, reducing runtime and energy consumption.
Refrigerant level verification ensures proper cooling capacity. Low refrigerant reduces cooling ability and damages compressors. We check pressures, calculate superheat and subcooling, and identify any leaks. If refrigerant is low, we locate and repair leaks before recharging to manufacturer specifications.
Electrical component testing prevents unexpected failures. Texas heat degrades electrical components faster than moderate climates. We test capacitors, inspect contactors, check wire connections, and measure amp draws. Replacing weak components during maintenance prevents inconvenient breakdowns.
Moving parts lubrication reduces wear and noise. Motors and bearings require proper lubrication to operate smoothly. We lubricate all accessible points with manufacturer-specified lubricants, extending component life and reducing operating noise.
Calibration and adjustment optimizes performance. We calibrate thermostats for accurate temperature control, adjust refrigerant charge for peak efficiency, set proper belt tension, and verify safety control operation. These adjustments ensure your system operates exactly as designed.

Fall Heating Preparation

While cooling dominates our climate, heating maintenance remains important for those cold snaps:

Heat exchanger inspection ensures safe operation. Cracked heat exchangers leak carbon monoxide into your home. We thoroughly inspect exchangers using cameras and testing equipment to identify any safety concerns.
Burner cleaning and adjustment provides efficient heating. Dirty burners waste fuel and create carbon monoxide. We clean burners, adjust gas pressure, and verify proper combustion for safe, efficient operation.
Safety control testing protects your family. We test limit switches, flame sensors, and carbon monoxide detectors to ensure they'll protect you if problems develop.

Advanced Diagnostic Testing

Modern air conditioners are complex systems requiring sophisticated diagnostic approaches:

Performance Testing

Temperature differential measurement verifies cooling capacity. We measure temperature drops across evaporator coils, comparing readings to manufacturer specifications. Inadequate temperature differential indicates problems requiring correction.
Airflow measurement ensures proper circulation. Using digital manometers and flow hoods, we measure airflow at registers and returns. Proper airflow is critical for comfort, efficiency, and humidity control.
Static pressure testing reveals ductwork problems. High static pressure indicates restrictions that strain systems and waste energy. We identify and correct issues like undersized ducts, closed dampers, or collapsed sections.

Refrigerant System Analysis

Superheat and subcooling calculations determine exact refrigerant charge. These technical measurements ensure optimal efficiency and prevent compressor damage. Improper charge is one of the most common efficiency thieves we correct.
Leak detection finds problems before they worsen. Using electronic detectors and UV dyes, we identify tiny leaks that gradually reduce capacity. Early detection prevents expensive refrigerant loss and system damage.
Oil analysis predicts compressor problems. Examining refrigerant oil reveals acid formation and contamination that precede compressor failure. This early warning allows preventive replacement before catastrophic failure.

Component-Specific Maintenance

Evaporator Coil Maintenance

Your indoor evaporator coil removes heat and humidity from air. Proper maintenance includes:

Deep cleaning removes biological growth and debris. Our humid climate promotes mold and algae growth on constantly wet evaporator coils. We use EPA-approved biocides and specialized equipment to eliminate growth and restore heat transfer.
Drain pan treatment prevents water damage. Rust and algae in drain pans cause clogs and leaks. We clean pans, treat with algaecides, and ensure proper drainage to prevent water damage.
Fin straightening restores airflow. Bent fins restrict air movement and reduce efficiency. Using specialized combs, we carefully straighten fins without causing damage.

Condenser Unit Maintenance

Your outdoor unit endures weather extremes and environmental contamination:

Coil cleaning removes seasonal accumulation. Grass clippings, leaves, cottonwood seeds, and dirt coat condenser coils, reducing heat rejection. We thoroughly clean coils inside and out, restoring proper heat transfer.
Cabinet inspection identifies rust and damage. We inspect cabinets for rust, check mounting stability, and ensure proper clearances for airflow. Early intervention prevents costly damage.
Fan motor service ensures reliable operation. We check motor bearings, test run capacitors, and verify proper operation at all speeds. Catching motor problems early prevents complete failure.

Blower Maintenance

Your blower moves thousands of cubic feet of air hourly:

Wheel cleaning maintains proper airflow. Dirty blower wheels move less air and strain motors. We remove and clean wheels thoroughly, restoring design airflow.
Belt inspection and adjustment in older systems prevents failures. We check belt condition, adjust tension, and replace worn belts before they break.
Motor maintenance extends equipment life. We test motor windings, check bearings, and ensure control modules function properly. Variable-speed motors receive specialized testing for all speed ranges.

Indoor Air Quality Maintenance

Your AC system affects more than temperature - it impacts the air you breathe:

Filter Services

Filter inspection and replacement maintains airflow and air quality. We evaluate filter condition, recommend appropriate MERV ratings, and establish replacement schedules based on your specific needs.
Filter rack sealing prevents bypass. Gaps around filters allow unfiltered air into your system. We seal filter racks ensuring all air passes through filters.
Upgrade recommendations for better filtration. We assess whether enhanced filtration would benefit your family, recommending solutions from better filters to electronic air cleaners.

We Offer Financing Options
to Make Service Even Easier

We understand unexpected repairs or system replacements can be expensive. That’s why we’re proud to offer convenient, flexible financing options from our partners at Wisetack to help you get the service you need at an affordable rate.

UV Light Maintenance

If you have UV purification systems:

Bulb replacement maintains effectiveness. UV bulbs lose intensity over time. We replace bulbs annually to maintain germicidal effectiveness.
Cleaning and adjustment optimizes performance. Dust on bulbs reduces UV output. We clean bulbs and ensure proper positioning for maximum effectiveness.

Humidification System Service

Whole-house humidifiers require regular maintenance:

Pad replacement ensures proper operation. Mineral buildup reduces evaporation. We replace pads seasonally for optimal performance.
Water panel cleaning prevents mineral buildup. We clean distribution systems and water panels to maintain proper flow.
Control calibration maintains comfort. We adjust humidistats for seasonal requirements and verify proper integration with your HVAC system.

Ductwork Inspection and Maintenance

Your ductwork delivers conditioned air throughout your home:

Duct Sealing Services

Leak detection identifies energy waste. Using smoke pencils and pressure testing, we locate leaks dumping cooled air into unconditioned spaces.
Mastic sealing provides permanent repairs. Unlike tape that fails over time, mastic compound creates lasting seals that improve efficiency.
Insulation evaluation prevents condensation. Missing or damaged insulation causes condensation and energy loss. We identify and correct insulation problems.

Return Air Optimization

Sizing evaluation ensures adequate return air. Insufficient return air starves systems and reduces efficiency. We measure return capacity and recommend improvements.
Grille cleaning maintains airflow. Dirty return grilles restrict airflow. We clean grilles and check for proper sealing.

A Maintenance Plan
Designed For You

Preventive maintenance is the best way to avoid costly breakdowns and repairs. By enrolling in ourmaintenance program, you’ll see greater energy savings, ensure maximum system life, and make sure yourhome systems are performing in top condition.

2 Maintenance
Visits a Year

10% Off on
All Repairs

24-Hour Service
for Emergencies

Priority
Scheduling

Spring Checks
& Cleanings

Fall Checks
& Cleanings

Join Now Explore Our Plan

We're Your Local Professionals at Total Comfort Air Solutions

Total Comfort Air Solutions LLC has been the dream of a local husband and wife team for quite some time. We are a family owned HVAC company, we have lived in the Bryan-College Station area for over 20 years and have built our lives in this community. Steven has been in the local HVAC industry for over 25 years spending his time gaining knowledge as a service technician and commercial HVAC project manager. Steven has managed and operated various HVAC installations and repairs in countless local businesses and residential homes.

Stephanie has been an accountant for local businesses for over 15 years working in in the Bryan-College Station and Houston areas. When we are not running TCAS, we are spending all of our time cheering on our son in soccer and football as well as hanging out with our high-maintenance pup, Rose. We are looking forward to building a trusted brand in Bryan-College Station and providing impeccable service at an honest and fair price.

Seasonal Maintenance Programs

Our Maintenance Club Membership

Join hundreds of Brazos Valley homeowners who protect their comfort with our maintenance program:

Bi-annual professional maintenance keeps systems operating perfectly. Spring and fall visits ensure year-round reliability and efficiency.
Priority emergency service when problems occur. Members jump to the front of our service queue during peak season when demand is highest.
15% repair discounts reduce unexpected costs. When repairs are needed, members save significantly on parts and labor.
No overtime charges for emergency calls. Evening and weekend rates don't apply to members, providing peace of mind.
Transferable membership adds value when selling. New homeowners appreciate knowing the HVAC system has been professionally maintained.

Commercial Maintenance Programs

Businesses require customized maintenance approaches:

Monthly/quarterly service for high-use systems. Commercial equipment running constantly needs more frequent attention than residential systems.
Rooftop unit expertise up to 25 tons. We maintain package units, ensuring business comfort and minimizing disruption.
Customized service agreements match your specific needs. We develop maintenance programs around your schedule, budget, and equipment requirements.
Documentation for compliance meets lease and insurance requirements. We provide detailed service records demonstrating proper maintenance.

Energy Efficiency Optimization

Maintenance directly impacts operating costs:

Efficiency Testing and Improvements

SEER verification ensures rated efficiency. We test actual operating efficiency, comparing it to manufacturer ratings and making adjustments to achieve optimal performance.
Airflow balancing eliminates hot spots. Proper airflow distribution ensures even temperatures and prevents system strain.
Thermostat programming maximizes savings. We optimize schedules based on your routine, potentially saving hundreds annually.

Upgrade Recommendations

During maintenance, we identify efficiency opportunities:

Component upgrades that improve performance. Sometimes adding a hard-start kit or replacing a single-speed motor with variable-speed improves comfort and efficiency significantly.
System modifications addressing comfort issues. Adding return air, sealing ducts, or installing zoning solves problems without system replacement.
Replacement timing for maximum benefit. We help you plan replacement before emergency failure, allowing you to choose timing and take advantage of promotions.

Professional Tools and Techniques

We use advanced equipment for thorough maintenance:

Digital Diagnostic Tools

Manifold gauges for precise refrigerant analysis
Multimeters for electrical testing
Manometers for pressure measurement
Thermal cameras for temperature analysis
Combustion analyzers for heating efficiency

Specialized Cleaning Equipment

Coil cleaning chemicals safe for equipment and environment
Fin combs for straightening damaged fins
Vacuum pumps for proper evacuation
Nitrogen tanks for pressure testing
UV dye injection for leak detection

The Maintenance Difference

Well-maintained systems provide benefits beyond reliability:

Comfort Improvements

Consistent temperatures throughout your home. Clean coils and proper refrigerant charge eliminate hot spots and cold zones.
Better humidity control during our humid summers. Properly maintained systems remove more moisture, improving comfort at higher thermostat settings.
Quieter operation from lubricated motors and clean components. Maintenance eliminates annoying squeaks, rattles, and vibrations.

Health Benefits

Improved air quality from clean systems and filters. Regular maintenance removes accumulated dust, pollen, and biological growth.
Reduced allergens through proper filtration. We ensure filters work effectively and recommend upgrades for allergy sufferers.
Mold prevention via proper drainage and coil cleaning. Maintenance prevents the moisture accumulation that promotes mold growth.

What Our Customers Are Saying

Leave A Review Leave A Review

When to Schedule Maintenance

Timing matters for effective maintenance:

Ideal Scheduling

Spring maintenance in March or April prepares for cooling season before extreme heat arrives.
Fall service in October or November ensures heating readiness while allowing time for any needed repairs.
Off-peak scheduling provides better availability and allows thorough service without rush.

Signs You Need Immediate Maintenance

Don't wait for scheduled service if you notice:

Unusual sounds like squealing, grinding, or clicking
Reduced airflow from registers
Increased energy bills without explanation
Uneven cooling between rooms
Excessive cycling on and off
Ice formation on indoor or outdoor units
Water leaks near indoor equipment
Unusual odors when system operates

Service Area Coverage

We provide maintenance throughout the Brazos Valley:

College Station - Our home base ensures rapid response
Bryan - Complete coverage of all neighborhoods
Navasota - Regular maintenance routes established
Caldwell - Serving all of Burleson County
Iola - Rural routes covered efficiently
Tabor - Agricultural properties included

Why Choose Total Comfort Air Solutions for Maintenance

Professional Qualifications

BBB Accredited Business maintaining high standards
TACCA Member following industry best practices
Chamber of Commerce active participant
Greater Brazos Valley Builders Association partner
NATE-certified maintenance technicians
Factory training on Armstrong Air, Carrier, and Daikin

Our Maintenance Commitment

Thorough 30-point inspections
Transparent condition reporting
No high-pressure sales tactics
Respect for your home and schedule
Clear pricing with no hidden fees
Educational approach to help you understand your system

Heating & Cooling Experts Serving College Station, Texas, Bryan, Texas & Beyond

We’re here to help with all of your heating & cooling needs in the Bryan-College Station, Texas area. We offer installation, repair, and maintenance services at an affordable price and dedicate ourselves to helping our community.

Schedule Service

Start Your Maintenance Program Today

Don't wait for problems to develop. Protect your comfort, reduce operating costs, and extend equipment life with professional maintenance from Total Comfort Air Solutions LLC.

Join our maintenance club and enjoy priority service, repair discounts, and the peace of mind that comes from knowing your system is professionally maintained by experts who understand the unique challenges of College Station's climate.

Remember: We Are Not Comfortable Until You Are

Contact us today to schedule your comprehensive AC maintenance service and discover why Brazos Valley homeowners trust Total Comfort Air Solutions to keep their systems running perfectly year after year.

Book Your Maintenance